RAM GPS Cradles and Mounts

All RAM GPS mounts and cradles come standard with a one inch diameter double ball and socket system. These custom made cradles are designed to withstand more than 50 g's of shock and will hold your hand held device rock solid even in the harshest of conditions. The patented rubber ball and socket design will protect the electronics from damage due to vibration. All these RAM components are 100% interchangeable so if you decide to switch GPS units simply switch out the GPS cradle necessary to make the change. Additional components are available so that your GPS can be quickly and easily moved from your windshield, handlebar, deck or any other location that you want. Convenience and quality without a big dollar expense is what RAM brings along with lifetime warranties, electronic protection and perfect viewing angles.

NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. Garmin and GPSonAIR does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)

FOR GARMIN NUVI 350, 360, 370 (NOT 660) (requires use of cables & suction bracket included with original package from Garmin)

NUVI SCREW IN BASE

RAM-B-138-GA21

U-BOLT BASE FOR BIKES

RAM-B-149Z-GA21

NUVI SUCTION CUP BASE

RAM-B-166-GA21

NUVI FLEX ARM MOUNT

RAP-105-6224-GA21U

RACHET-PIVOT SUCTION

RAP-B-104-224-GA21U

BRAKE-CLUTCH MOUNT FOR GOLDWING

RAM-B-174-GA21U

FOR GARMIN RINO 110, 120, 130 GPS UNITS

SCREW IN BASE

U-BOLT BASE FOR BIKES

SUCTION CUP BASE

TWIST-LOCK SUCTION CUP WITH 6" FLEX

FOR GARMIN RINO 500c Series

RAM-B-138-GA20U

SCREW IN BASE FOR RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

RAM-B-149Z-GA20U

U-BOLT BASE FOR BIKES RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

SUCTION CUP BASE RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

RAM-B-166-GA20U

TWIST-LOCK SUCTION CUP WITH 6" FLEX RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

RAP-105-6224-GA20U

FOR GARMIN 76c/cs GPS (color series only)

SCREW IN BASE

U-BOLT BASE FOR BIKES

SUCTION CUP BASE

TWIST-LOCK SUCTION CUP WITH 6" FLEX

FOR GARMIN QUEST

SCREW IN BASE

U-BOLT BASE FOR BIKES

SUCTION CUP BASE

TWIST-LOCK SUCTION CUP WITH 6" FLEX

FOR GARMIN 7000 SERIES

Screw On Base

RAM-B-101-G3U (you will need to use part of mounting bracket and electrical cables supplied by Garmin that were included with your original GPS purchase)

"U" Bolt Base (1/2" to 1") for Motorcycle

RAM-B-149Z-G3U (you will need to use part of mounting bracket and electrical cables supplied by Garmin that were included with your original GPS purchase)

Locking Suction Windshield Base

RAM-B-166-G3U (you will need to use part of mounting bracket and electrical cables supplied by Garmin that were included with your original GPS purchase)

FOR THE GARMIN ETREX CAMO SUMMIT VENTURE LEGEND VISTA (NOT COLOR)

SCREW IN BASE

(includes cradle)

U-BOLT BASE

(includes cradle)

SUCTION CUP BASE

(includes cradle)

TWIST-LOCK SUCTION CUP WITH 6" FLEX

FOR THE GARMIN ETREX COLOR SERIES

SCREW IN BASE

(includes cradle)

RAM-B-138-GA16U

U-BOLT BASE

(includes cradle)

RAM-B-149Z-GA16U

SUCTION CUP BASE

(includes cradle)

RAM-B-148-GA16U

RAM SUCTION CUP, TWIST LOCK MOUNT (includes cradle)

RAM-B-166-GA16U

RAM RATCHET, PIVOT, SUCTION MOUNT (includes cradle)

RAP-B-104-224-GA16U

RAM FLEX ARM, SUCTION CUP, TWIST LOCK MOUNT (includes cradle)

RAP-105-6224-GA16U

FOR GARMIN 60C

SCREW IN BASE

(includes cradle)

U-BOLT BASE

(includes cradle)

SUCTION CUP BASE

(includes cradle)

TWIST-LOCK SUCTION CUP WITH 6" FLEX

COMPONENTS ONLY

6" Flex Arm w Double Round Connectors

RAP-105-6RRU

6" Flex Arm w Diamond and Round Connectors

6" Flex Arm w Diamond Connectors

DRINK CUP HOLDER MOUNT

RAM-B-132

DIAMOND BASE

RAM-B-238

RAP-319

U-Bolt shim for 1/2" to 3/4" handlebars

ROUND BASE

RAM-B-202

YOKE BASE

RAM-B-121B

SUCTION CUP BASE

RAM-B-224

RAIL BASE FOR 3/4" TO 1" RAIL WITH 1" BALL

RAP-B-231

Locking 3.3" Dia. Suction Cup. Screws to Diamond Base or Round Base.

RAM-B-231

RAM BASE W/ U-BOLT FOR 3/4" TO 1" DIA.

ADHESIVE BASE

RAP-273

HANDLEBAR & RAIL MOUNT

SUCTION CUP MOUNT

CHROME

DOUBLE SOCKET ARM FOR 1" BALL (3 3/4" long)

RAM-B-201CH

DOUBLE SOCKET ARM FOR 1" BALL (3 3/4" long)

RAM-B-201

DOUBLE SOCKET ARM FOR 1" BALL (2 1/4" long)

RAM-B-201U-A

RAM HOLDER GARMIN NUVI 350 & 360 ONLY(requires use of cables & suction bracket included with original package from Garmin)

RAM-HOL-GA21U

RAM CRADLE FOR THE GARMIN nüvi 660 - 670 (requires use of cables & suction bracket included with original package from Garmin)

RAM-HOL-GA23

Garmin 7000 series cradle

RAM-B-202-G3U
RAM BASE & BALL W/ GARMIN MOUNTING HARDWARE

Garmin eTrex Cradle

(USE DIAMOND BASE TO ATTACH)

RAM PIVOT SUCTION MOUNT TWIST LOCK

RAP-B-104-224

(USE DIAMOND BASE TO ATTACH)

Garmin Quest Cradle

(USE DIAMOND BASE TO ATTACH)

COLOR 76 SERIES ONLY

Garmin GPS 76c/cs Cradle

RAM-HOL-GA8U

Garmin Rino 110, 120, 130 Cradle

(USE DIAMOND BASE TO ATTACH)

RAM-HOL-GA20U

Garmin Rino 500 series cradle

RAM-HOL-GA19U

Garmin c300 series cradle (comes with 1" ball)

Garmin 60c/cs Cradle

(USE DIAMOND BASE TO ATTACH)

RAM MOTORCYCLE HANDLEBAR MOUNTING BASE SINGLE BALL BASE

RAM MOTORCYCLE HANDLEBAR MOUNTING BASE DOUBLE BALL BASE