Save your handheld GPS or FRS from some of the scuffs and scrapes it could pick up in the line of duty. This nylon carrying case protects your unit while in storage or in the field. Features a wide zippered opening and a belt loop for accessibility and portability.

Protective Case

Rubberized & elastic leather look case covers the front of the GPS with clear plastic and allows use of the button clip on the back of the GPS. You can take the GPS off your belt clip, push the buttons and view the screen without removing the case.

010-10578-00

Neoprene Case

• Specifically designed for the Garmin GPSMap 60CS and 60C, this carrying case ensures optimal protection, and accessibility.
• Fully compatible with Garmin GPSMap 60, GPSMap 60C, 60CS, and GPS 60 units.
• Carabiner
• Belt/Bike Handlebar Velcroed Strap.
• Clear Vinyl Map/Button Windows.

SCREW IN BASE

(includes cradle)

U-BOLT BASE

(includes cradle)

SUCTION CUP BASE

(includes cradle)

RAM HEAVY DUTY MOUNTING BRACKETS

TWIST-LOCK SUCTION CUP WITH 6" FLEX

  Dashboard mount

Your GPS really gets around. Better get this dashboard mounting base so you can use it in a second vehicle. Temporary and permanent adhesive disks included.

Automotive Mounting Bracket

Marine Mount

Automotive windshield mounting bracket with suction cup mount

Part No: 010-10457-00

Rail mount adapter (attaches to GPS unit with bike clip that is included with new units)

Part No: 010-10496-01

Large Diameter Rail Mount Adapter for (accommodates 25-32mm dia.) For use with optional bike or rail mount accessory

Handlebar mounting bracket

010-10454-00

  Cigarette lighter adapter

Save a battery's life—buy an adapter. Plugs into any standard cigarette lighter receptacle to power your GPS.

SCREEN PROTECTORS

Includes 15 Self-Adhering Screen Protectors: Simple. Tough. Affordable. Quite simply, ScreenGuardz protectors are the perfect choice for GPS users looking to get the most out of their hand-held devices. Made from a special polymer, the patented ultra-slim overlays keep your GPS screen scratch-free, while also reducing glare, increasing visibility

Micro-fiber Cleaning Cloth

 GA 27C Style low profile
remote automobile antenna

This new and improved remote antenna runs on a lower voltage so battery drain is minimized. Comes with two mounting options. Magnetic mount for the outside of your vehicle or boat. Suction mount holds antenna in place against the inside of your windshield or window. With 8 feet of cable and MCX connector.

NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. Garmin and GPSonAIR does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)

MapSource Topo

 
Rechargeable, NiMH, AA battery kit, USA

Portable mount
(no installation required) 

For use with automotive
mounting brackets

4-pack NiMH AA Battery

MapSource National Parks West Topo

Here's a temporary fix that'll keep your GPS dash mount in place in any vehicle. Mount your unit to the dash or glare shield and just lift it off and remove the adhesive when you're done. These temporary disks are a solid piece of adhesive.
For use with automotive mounting brackets and dash mounts

Carabiner Button Clip

Package includes 1 carabiner and beltclip button.

MapSource National Parks Central Topo

MapSource National Parks East Topo

Trust us; when we say permanent, we mean permanent. Stick your StreetPilot or 295 dash mount down with one of these, and it's not going anywhere ... ever. Not up to a permanent fix? Try our temporary adhesive disks. Permanent disks have an oval cutout in center while the temporary disks are solid.
For use with automotive mounting brackets and dash mounts

  Belt Clip & Button

Garmin MapSource TOPO CANADA

GA 29 low profile
remote marine antenna 

If you're mounting your GPS unit below deck, you'll need this remote marine antenna to receive GPS signals. Comes with 30 feet of cable and BNC connector. (Can be mounted flush or pole.)

You're going to need a MCX to BNC adaptor (top right of this page) for this antenna to connect to your 60CS.

AC/PC Adapter

This adapter allows you to connect your GPS unit to AC power (U.S., 110-volt) and to your PC. Features standard 9-pin D connector.

MapSource Blue Charts

(CD only, DataCard not Compatible)

INLAND LAKES CONTINENTAL U.S.

AC Adapter

No need to burn batteries if you're using your GPS indoors to get familiar with its operations or plan a trip. This adapter plugs into any standard U.S. outlet to provide AC power to your unit.

Trip & Waypoint Manager

8ft Extension Cable
for GA 27 series Antenna 

If the 8 feet of cable that comes with the GA 27C Style remote antenna isn't enough, here's another 8 feet.

PC interface cable
with cigarette lighter adapter

This cable allows you to make a powerful connection between your GPS and your PC. Create routes and waypoints on your PC and transfer them to your GPS. You can also download map detail from MapSource CD-ROMs to compatible units. Cable features a standard 9-pin D connector. Connects to any 12-volt receptacle.

City Select North America

So the suction cup mount that came with your GA 26/27 or GA 26C/27C antenna is gone and you're lost without it. No problem. Here's the replacement.

This cable allows you to make a powerful connection between your GPS and your PC. Create routes and waypoints on your PC and transfer them to your GPS. You can also download map detail from MapSource CD-ROMs to compatible units. Cable features a standard 9-pin D connector. Does not provide wiring for external power.

CANADA

MapSource® MetroGuide Canada CD-ROM

  Power/Data Cable
(bare wire)

This power and data cable has bare wires at the end so you can hard wire your GPS directly to a DC power source or some other electronic device. This allows you to send speed and position data to devices such as a chartplotter, computer, auto pilot, radar, etc.

 
GA 26/27 series Flange Antenna Mount

If you're mounting a GA 26/27 and GA 26C/27C antenna to a thin surface, such as the outside of an RV, boat, or car, add some structural strength with this sturdy, one-piece flange mount.

This cable allows you to make a powerful connection between your GPS and your PC. Create routes and waypoints on your PC and transfer them to your GPS. Also allows you to download map detail from MapSource CD-ROMs to compatible units. Cable features a USB connector. Does not provide wiring for external power.

City Navigator Middle East

GA 28/ GPS36 Flange Mount

If you're mounting a GA 28 antenna to a thin surface, such as the outside of an RV, boat, or car, add some structural strength with this sturdy, one-piece flange mount.

MCX to BNC adapter cable 

How do you get from here to there if your GARMIN GPS has an MCX connector but your GARMIN external antenna has a BNC connector? Bridge the difference with this MCX to BNC adapter.

City Select South. Africa

This product DOES NOT do the routing function on a GPS unit

MapSource WorldMap

City Navigator Australia

City Navigator Europe v8

GA 25MCX low profile remote GPS antenna (integrated magnetic mount, 9.5 ft. cable, MCX connector)

010-10702-00

MetroGuide AUSTRALIA